Axial SCX24 Deadbolt 1:24 Elektrik 4WD - RTR Grün - AXI90081T2

Axial SCX24 Deadbolt 1:24 Elektrik 4WD - RTR Grün - AXI90081T2

Artikelnummer: AXI90081T2
GTIN: 605482298701
Kategorie: RC-Cars
Hersteller: Axial

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Green

132,99 €

inkl. 19% USt. ,

UVP des Herstellers: 139,99 €

(Sie sparen 5%, also 7,00 €)

Beim Lieferanten vorratig
Lieferzeit 3-5 Werktage
zzgl. Versandlaufzeit in D: 1 - 3 Werktage (DE - Ausland abweichend)

Stk

Beschreibung
Bewertungen

Axial SCX24 Deadbolt 1:24 Elektrik 4WD - RTR Grün - AXI90081T2

Features

Includes 3 channel radio system, ESC and transmitter batteries
Includes motor and on-board LiPo battery
Realistic narrow-stance rock crawler body in olive green or red
Molded roll cage with realistic light bar
Realistic driver figure and many other scale details
Officially licensed KMC XD229 Machete Crawl wheels
Officially licensed Nitto Trail Grappler M/T tires (S30 compound, large block tread)
Full-time 4WD
Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels
Steel front and rear axles, front stub axles and dogbones provide strength and durability

Rugged steel C-channel frame rails with bracing keep everything rigid and aligned
Front and rear axles consist of a two-piece, molded plastic solid axle design
3-Link front and 4-link rear suspension supply optimal handling
Coil-over shocks with simulated reservoir and durable plastic suspension links deliver proven Axial crawling performance
Front and rear differentials each house a worm gear setup to power the axles and create higher ground clearance. Worm gear drive also provides a low gear ratio to reduce torque twist
Two LEDs in the front bumper for night driving

Needed to Complete

Nothing! Everything you need to begin having fun with your 1/24 scale Deadbolt is included!

What's in the Box?

(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck

(1) Axial AE-6 ESC/receiver combo (installed)
(1) Dynamite^® 88T brushed electric motor (installed)
(1) Axial AS-1 steering servo (installed)

(1) Axial^® AX-4 2.4GHz 3-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo charger
(1) Product Manual

Overview

The SCX24™ Deadbolt™ 4WD is the first Axial^® off-roader in 1/24 scale. At less than 8" long, it's the perfect rig to take along on your hiking, camping, and other outdoor and indoor adventures — offering factory-assembled ease, scale looks, and confident handling on any trail.

Even new modelers driving the SCX24 chassis will be well-equipped to tackle tough climbs and rough trails. Like the larger SCX10™ II chassis, this smaller version uses plenty of steel components — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pushing onward and upward.

For the most reliable handling, the SCX24 chassis features a three-link front and four-link rear suspension. The combination of coil-over shocks and durable plastic suspension links delivers Axial-worthy crawling performance even at this small scale. The worm gear drive setup permits a high ground clearance plus a low gear ratio that reduces torque twist.

Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt shows off competence and charisma on the trails. Check out that Deadbolt body — with its narrow stance, bulging hood, realistic driver figure, and molded roll cage with realistic light bar. The realism continues right down to the ground, where you'll find licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires.

Adding even more to its beginner appeal, the SCX24 Deadbolt comes 100% complete and ready to run. Everything required for action is in the box: assembled and finished vehicle; Axial 3-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite^® 88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even four AA cells for the transmitter!

Akkus:	7.4V 350mAh 30C LiPo
Antriebsstrang:	4WD
Aufhaengung:	Solid axle, front and rear
Bodenabstand:	1.06" (27mm)
Breite:	3.9" (99.5mm)
Chassis:	Stamped steel rails
Differentiale:	Worm gear 16T/4T
Fahrzeugtyp:	Crawler
Getriebeuntersetzung:	32P
Gewicht:	0.5lb (0.22kg)
Groesse / Massstab:	1/24
Hoehe:	4.73" (120.2mm)
Karosserie:	Painted and trimmed Axial Deadbolt
Ladegerät:	USB LiPo charger
Laenge:	7.8" (199.5mm)
Montagezeit ca.:	Keine Montage notwendig
Motor Type:	Brushed
Motorengroesse:	180
Radbreite:	0.48" (12.4mm)
Raddurchmesser:	1.0" (26mm)
Radio:	AX-4 2.4GHz 3-channel
Radstand:	5.25" (133.5mm)
Reifen / Bereifung:	Black Plastic Licensed KMC XD229 Machete Crawl
Reifendurchmesser:	2.0" (51mm)
Reifenprofil:	Nitto Trail Grappler M/T, large block tread
Ritzel:	10Z
Servos:	AS-1 steering servo
Speed Control:	AE-6 ESC receiver/combo
Spritzwassergeschuetzt:	Nein
Stößdämpfer:	Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Stirnrad:	55Z
Track:	3.9" (99.5mm)
Vorfertigungsgrad:	RTR (Ready-To-Run)

Maßstab:	1:24
Empfohlenes Gelände:	Offroad
Antrieb:	Elektro Brushed
Allrad oder 2 WD:	Allrad

Es gibt noch keine Bewertungen.