Blade Nano S3 RTF with AS3X and SAFE Micro RC-Heli - BLH013000
The best micro RC collective pitch helicopter gets even better! The Blade® Nano S3 heli offers built-in telemetry and an improved stabilizing system to handle difficult maneuvers.
Key Features
- Powerful - Powerful coreless motors allow for advanced 3D maneuvers
- Light Weight - Low disc loading for advanced aerobatics
- Linear Servos - Provide faster response and better holding torque over normal rotary servos
- 45C LiPo Battery - High power output for limitless aerobatics
- USB Charger - Provides charge-anywhere convenience
In The Box
- (1) Fully Assembled Nano S3 Micro Helicopter
- (1) Spektrum™ 2.4GHz DSMX® receiver (installed)
- (1) Spektrum™ MLP6 6-channel 2.4GHz DSMX® Transmitter
- (1) 45C LiPo Battery
- (1) USB LiPo Battery Charger
- (4) AA Transmitter Batteries
- Tools and Extras
- (1) Nano S3 RTF Manual
Needed to Complete
- Nothing! Everything you need to begin having fun with the Blade® Nano S3 RTF is in the box.
Blade Nano S3 RTF RC Helicopter Overview
The best micro RC collective pitch helicopter gets even better! The Blade® Nano S3 heli builds on the widely popular Nano S2 and offers key technology improvements including built-in voltage telemetry right to your compatible Spektrum™ transmitter. 3D aerobatic expertise is at your fingertips with new features that make mastering difficult maneuvers such as flips and inverted flight easier to learn for all skill levels.
A new flight controller comes totally re-tuned from the ground up improving AS3X® stability, an improved SAFE® mode with angle demand, and an improved panic recovery. On top of that, the SAFE Z altitude control utilizes the on-board accelerometer to keep the heli at a consistent altitude. With its vertically mounted flight controller, it significantly improves damping and removes vibration to the gyro. What you get is a heli with incredible control and performance and the ability to execute dazzling 3D maneuvers. Linear servos deliver the muscle for impressive control authority while the 45C LiPo flight battery produces efficient power for 3D flight.
Construction with super-resilient polymers along with a carbon-fiber main shaft and tail boom give the model's lightweight airframe amazing durability. Most impacts that occur while practicing 3D maneuvers cause no harm. If you do happen to need a repair, nearly all the parts from the Nano S2 are compatible with the new Nano S. With the Nano S, hone your indoor 3D skills like never before.
Produkt Eigenschaften
| Approximate Assembly Time |
No Assembly Required |
| Approximate Flight Time |
4-5 minutes |
| Battery |
Included |
| Charger |
Included |
| Erfahrungs-Level |
Level 2 |
| Fertigstellungsgrad |
Ready-To-Fly |
| Hauptmotor Typ |
Bürstenmotor |
| Hauptrahmen Material |
Kunststoff |
| Hauptrotor Material |
Kunststoff |
| Hauptrotorkopf Typ |
Collective Pitch Flybarless |
| Heckrotor Material |
Kunststoff |
| Heckrotor Motor Typ |
Coreless |
| Kanäle |
5 |
| Main Rotor Blade Length |
3.3" (84 mm) |
| Main Rotor Diameter |
7.71" (196 mm) |
| Material Kabinenhaube/Karosserie |
Kunststoff |
| Minimum Required Radio |
DSM2®/DSMX® Compatible Transmitter |
| Power Typ |
Elektrisch |
| Product Height |
3.11" (79 mm) |
| Product Length |
7.87" (200 mm) |
| Product Weight |
Without Battery: 28g / With Recommended 1S 150mA Flight Battery: 32g |
| Radio |
Included |
| Receiver |
Included |
| Recommended Motor Battery |
150mAh 1S 3.7V 45C Li-Po Battery |
| Speed Control |
Included |
| Tail Drive |
Direct Drive |
| Tail Rotor Diameter |
1.57" (40 mm) |
| Technology |
AS3X and SAFE |
