Losi 22S No Prep Drag Roller: 1/10 2WD Drag Car RC-Car - LOS03041

Losi 22S No Prep Drag Roller: 1/10 2WD Drag Car RC-Car - LOS03041

Artikelnummer: LOS03041
GTIN: 605482766163
Kategorie: RC-Cars
Hersteller: Losi

22S No Prep Drag Roller: 1/10 2WD Drag Car

265,99 €

inkl. 19% USt. ,

UVP des Herstellers: 279,99 €

(Sie sparen 5%, also 14,00 €)

momentan nicht verfügbar
Bitte Lieferzeit anfragen

Losi 22S No Prep Drag Roller: 1/10 2WD Drag Car RC-Car - LOS03041

Setting the standard in the industry for years, the Losi® 22S No Prep Drag Car Roller kit lets racers create their personalized drag race car.

Key Features

Aluminum Chassis
Officially licensed Mickey Thompson low drag front tires and rear drag racing slicks
All Metal Gear Transmission
Clean wire router installation
Precision Adjustable Wheelie Bar

In The Box

(1) Losi 1/10 22S 2WD No Prep Drag Car Roller
(1) Product Manual

Needed to Complete

(1) 2-Channel Transmitter and Receiver
(1) 2-3S LiPo Battery
(1) ESC
(1) Motor And Pinion Gear
(1) Compatible LiPo Charger
(1) Steering Servo
(1) Body And Paint
(1 Set) Assorted Tools (See Manual For Details)

Setting the standard in the industry for years, the Losi^® 22S No Prep Drag Car Roller kit lets racers create their personalized drag race car. With the popularity of No Prep Drag Racing exploding, Losi has once again taken it to the next level with a truly innovative design and the quality workmanship drivers expect. It has all the advantages of an aluminum chassis with plenty of 22s option parts, as well as being a pre-built roller. It's designed with racers in mind with Mickey Thompson branded large rear drag racing slicks and low drag, front tires. You get an all-metal gear transmission for concrete dependability and wire routes keeping your electronics and their wires in place and clean. The Elastomer battery mounting system is quick, easy and secure. Choose the electronics and body you want to run with and fly down the dragstrip in style.

Features

Aluminum Chassis
Officially licensed Mickey Thompson low drag front tires and rear drag racing slicks
All Metal Gear Transmission
Clean wire router installation

Precision Adjustable Wheelie Bar
Elastomer battery mounting for a versatile battery hold down system
Full line of Aluminum Option Parts Available

Produkt Eigenschaften

Charger	Sold Separately
Receiver	Sold Separately
Shock Type	Oil-filled internal limited coil-over spring
Ball Bearings	Full set
Chassis	3mm plate, 6061-T6 aluminum
Completion Level	Roller
Drivetrain	2WD
Drive Type	Forward/Brake/Reverse
Product Height	5" (127 mm)
Approximate Assembly Time	1 - 3 hours
Body	Not included
Brakes	Integral with ESC
Scale	1/10
Front Track	9.9" (252mm)
Vehicle Size	Standard
Product Width	10.375" (264 mm)
Radio	Sold Separately
Vehicle Type	Drag Car
Internal Gear Ratio	2.43:1
Product Length	24.5" (622 mm)
Spur Gear	84T
Suspension	Lower A-Arm, Upper Link
Battery	Sold Separately
Rear Track	10.0" (256.5mm)
Speed Control	Sold Separately
Wheelbase	13.1" (333 mm)
Power Type	Electric
Gear Pitch	48P
Servos	Sold Separately

Maßstab:	1:10
Empfohlenes Gelände:	Onroad
Antrieb:	Elektro Brushless
Allrad oder 2 WD:	2 WD

Es gibt noch keine Bewertungen.

Kontaktdaten

Vorname

Nachname

E-Mail

Ich habe die Datenschutzerklärung zur Kenntnis genommen und bin damit einverstanden. ()