Losi 22S No Prep Drag Roller: 1/10 2WD Drag Car RC-Car - LOS03041
Setting the standard in the industry for years, the Losi® 22S No Prep Drag Car Roller kit lets racers create their personalized drag race car.
Key Features
- Aluminum Chassis
- Officially licensed Mickey Thompson low drag front tires and rear drag racing slicks
- All Metal Gear Transmission
- Clean wire router installation
- Precision Adjustable Wheelie Bar
In The Box
- (1) Losi 1/10 22S 2WD No Prep Drag Car Roller
- (1) Product Manual
Needed to Complete
- (1) 2-Channel Transmitter and Receiver
- (1) 2-3S LiPo Battery
- (1) ESC
- (1) Motor And Pinion Gear
- (1) Compatible LiPo Charger
- (1) Steering Servo
- (1) Body And Paint
- (1 Set) Assorted Tools (See Manual For Details)
Overview
Setting the standard in the industry for years, the Losi® 22S No Prep Drag Car Roller kit lets racers create their personalized drag race car. With the popularity of No Prep Drag Racing exploding, Losi has once again taken it to the next level with a truly innovative design and the quality workmanship drivers expect. It has all the advantages of an aluminum chassis with plenty of 22s option parts, as well as being a pre-built roller. It's designed with racers in mind with Mickey Thompson branded large rear drag racing slicks and low drag, front tires. You get an all-metal gear transmission for concrete dependability and wire routes keeping your electronics and their wires in place and clean. The Elastomer battery mounting system is quick, easy and secure. Choose the electronics and body you want to run with and fly down the dragstrip in style.
Features
- Aluminum Chassis
- Officially licensed Mickey Thompson low drag front tires and rear drag racing slicks
- All Metal Gear Transmission
- Clean wire router installation
- Precision Adjustable Wheelie Bar
- Elastomer battery mounting for a versatile battery hold down system
- Full line of Aluminum Option Parts Available
Produkt Eigenschaften
| Akku |
Separat erhältlich |
| Antriebsstrang |
2-Rad Antrieb |
| Approximate Assembly Time |
1 - 3 hours |
| Ball Bearings |
Full set |
| Brakes |
Integral with ESC |
| Chassis |
3mm plate, 6061-T6 aluminum |
| Completion Level |
Roller |
| Drive Type |
Forward/Brake/Reverse |
| Empfänger |
Separat erhältlich |
| Fernsteuerung |
Separat erhältlich |
| Front Track |
9.9" (252mm) |
| Gear Pitch |
48P |
| Internal Gear Ratio |
2.43:1 |
| Karosserie |
Nicht Beinhaltet |
| Ladegerät |
Separat erhältlich |
| Maßstab |
1:10 |
| Power Typ |
Elektrisch |
| Product Length |
24.5" (622 mm) |
| Product Width |
10.375" (264 mm) |
| Produkthöhe |
5 |
| Rear Track |
10.0" (256.5mm) |
| Regler |
Separat erhältlich |
| Servos |
Separat erhältlich |
| Shock Type |
Oil-filled internal limited coil-over spring |
| Spur Gear |
84T |
| Suspension |
Lower A-Arm, Upper Link |
| Vehicle Type |
Drag Car |
| Wheelbase |
13.1" (333 mm) |
