Losi 8IGHT Nitro RTR: 1/8 4WD RC-Buggy - LOS04010V2
The 8IGHT
™ racing platform has multiple ROAR national titles and international wins to its credit. This thoroughly equipped, RTR version gives anyone eager to get into nitro buggy racing everything they need to be a contender, right out of the box.
Key Features
- Your fast track to nitro buggy racing
- 4mm 6061-T6 Aluminum Chassis Plate
- Dynamite® .21 nitro engine with pull start
- Metal-gear transmission and sealed differentials
- Gen III radio tray for longer servo life
In The Box
- (1) 8IGHT 4WD Nitro Buggy RTR
- (1) Spektrum SLT 3-Channel SLT Radio System
- (1) Dynamite 1600mAh 6V NiMH receiver pack
- (4) AA Transmitter Batteries
- (1) 4-Way Cross Wrench
- (1) Product Manual
Needed to Complete
- (1) 20-30% Nitromethane fuel
- (1) Nitromethane-Approved Dispenser
- (1) NiMH Battery Charger with Rx charge lead
- (1) Glow Igniter
Overview
If you are serious about becoming a competitive nitro buggy racer, this is the place to start. The Losi® 8IGHT Nitro Buggy RTR comes completely assembled and equipped with the brute power of a Dynamite® .21 nitro engine and the precise response that only a Spektrum™ SLT radio system can provide. You also get the benefit of a pre-set suspension that shares the same geometry team drivers use on their 8IGHT buggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle's performance with many of the 8IGHT option parts currently available.
Features
- Your fast track to nitro buggy racing
- Spektrum SLT 3-Channel SLT Radio System
- Spektrum SLR300 Surface Receiver
- Spektrum S614 Waterproof Metal Gear Surface Servo, 23T
- 4mm 6061-T6 Aluminum Chassis Plate
- Gen III radio tray for longer servo life
- Dynamite® .21 nitro engine with pull start
- Pre-set suspension geometry
- Metal-gear transmission and sealed differentials
- Center and rear dogbones
- 15mm adjustable oil-filled shocks
Produkt Eigenschaften
| Antriebsstrang |
4WD |
| Approximate Assembly Time |
No assembly required |
| Battery |
Included |
| Body |
Screen printed, cab forward design |
| Brakes |
Composite disc with steel pads |
| Chassis |
4mm 6061 T-6 aluminum |
| Differential |
Sealed, viscous filled |
| Fahrzeugtyp |
Buggy |
| Fertigstellungsgrad |
Ready-To-Run |
| Final Drive Ratio |
11.5:1 |
| Front Track |
12.1" (307mm) |
| Fuel Tank Capacity |
4.2oz (125cc) |
| Gear Pitch |
1.0 MOD |
| Ground Clearance |
2.4" (60mm) |
| Internal Gear Ratio |
3.92:1 |
| Ladegerät |
Separat erhältlich |
| Maßstab |
1:8 |
| Power Typ |
Nitro |
| Product Height |
7.1" (180 mm) |
| Product Length |
19.6" (498 mm) |
| Product Weight |
7.8lbs (3.5kg) |
| Product Width |
12.1" (307 mm) |
| Radio |
Included |
| Rear Track |
12.1" (307mm) |
| Receiver |
Included |
| Ritzel |
17Z |
| Servos |
Included |
| Shock Type |
16mm Big-Bore, aluminum body, oil-filled |
| Spur Gear |
50T |
| Suspension |
Independent |
| Wasserabweisend |
Ja |
| Wheelbase |
12.7" (323 mm) |
